Get Started
Need a helping hand getting started making your first beautiful bows? Look no further than the below instructions, which show you how to get perfect results every time using our Bow Maker and our new Big & Bowtiful Bow Maker.
Step 1
Place your ribbon through one of the bottom slots to secure in place. Thread the ribbon through your preferred top slot. The further the slot from the centre, the larger your bow will be.
Place your ribbon through one of the bottom slots to secure in place. Thread the ribbon through your preferred top slot. The further the slot from the centre, the larger your bow will be.
Step 2
Thread the ribbon through the corresponding slot on the opposite side of the Bow Maker and push through the central hole.
Thread the ribbon through the corresponding slot on the opposite side of the Bow Maker and push through the central hole.
Step 3
Pull the ribbon up and pull through the central slot, release the ribbon from the bottom slot and tie together to form the knot.
Pull the ribbon up and pull through the central slot, release the ribbon from the bottom slot and tie together to form the knot.
Step 4
Pull the tails upwards and slide the ribbon off the Bow Maker.
Pull the tails upwards and slide the ribbon off the Bow Maker.
Step 5
Your bow is now ready to decorate your chosen project.
Your bow is now ready to decorate your chosen project.
More Bows with the Big & Bowtiful Bow Maker
Step 1
Create a small bow using the original Bow Maker, leave this on the Bow Maker. Place your ribbon through one of the bottom slots to secure in place. Thread the ribbon through your preferred top slot and then through the corresponding slot on the opposite side.
Create a small bow using the original Bow Maker, leave this on the Bow Maker. Place your ribbon through one of the bottom slots to secure in place. Thread the ribbon through your preferred top slot and then through the corresponding slot on the opposite side.
Step 2
Push the ribbon through the central hole.
Push the ribbon through the central hole.
Step 3
Slot the original Bow Maker onto the Big & Bowtiful and clip in place. Thread another piece of ribbon through the central hole and tie around the bows to secure them together.
Slot the original Bow Maker onto the Big & Bowtiful and clip in place. Thread another piece of ribbon through the central hole and tie around the bows to secure them together.
Step 4
Pull the tails upwards and slide the ribbon off both Bow Makers.
Pull the tails upwards and slide the ribbon off both Bow Makers.
Step 5
Your bow is now ready to decorate your chosen project.
Your bow is now ready to decorate your chosen project.